OneUp Components wanted a lightweight hub, an affordable hub, and a quality, reliable hub. Usually, you can pick two, but theyre delivering all three, and they come in seven colors.The CNCd alloy hub shells pack simple but proven tech inside, are rated for any type of bike, from XC to long-travel eMTBs. Heres how they come togetherThe hub shell is machined from 7075 alloy, and its easily user-serviceable with a mostly tool-free disassembly, save for bearingsyoull need a press to replace those and pull the axle out (properly, anyway).The inner drive ring nested into CNCd grooves rather than being threaded in. They say this saves weight, allows wider bearing spacing, and makes it simpler to assemble and maintain.Claimed weight is just 362g for the pair 142g front and 220g rear (w/ XD freehub). This is lighter than most competing mainstream hubs on the market, at about half the price.Key specs include:44-tooth ratchet ring8.2 engagementEnduro ABEC 5 BearingsDouble-seal endcaps7 colorsJ-Bend spokes6-bolt rotor mountBoost spacing (110 F / 148 R)28 and 32 holeThe endcaps seals have waterproof grease applied between them and the bearings seals, and each hubset comes with a packet of DumondeTech waterproof grease for topping it off.Repairs should be easy, too. They use common J-Bend spokes, and the build specs are laser etched onto the hub shell for easy reference.Theyre available with HG, XD/XD-R, and Micro Spline freehub bodiesin your choice of Black, Pewter, Green, Orange, Red, Purple, and Blue. MSRP is just $370 for the set, or $100 for the front and $220 for the rear plus $50 for your choice of FH body.OneUpComponents.comThe post OneUp MTB Hubs Debut w/ Colorful, Affordable Design appeared first on Bikerumor.