• BIKERUMOR.COM
    Vee Tire Co. Launches RAD-Core Radial Casings for Three of Its Gravity-Oriented Tires
    Based on the perceived and real performance advantages of the radial casing constructions in Schwalbes mountain bike tires, we predicted that it was only a matter of time before more brands got on board with this technology. While weve seen a similar design from the small brand Zleen, it turns out, somewhat surprisingly, that Vee Tire Co. is the first larger tire brand to officially roll out radial casings on its tires. Vees new RAD-Core tires were unveiled just recently at iceBike.The Attack FSX is one of the tires that will be offered with the RAD-Core radial casing.What Are Radial Tires?Traditional mountain bike tire casings use criss-crossing threads arranged diagonally, typically at 45 degrees to the direction of travel. Tires with a radial construction, like those on a car, have the casing threads arranged radially, or at 90 degrees, perpendicular (or close to it) to the direction of travel.This orientation allows the tire to be more supple and deform to the trail surface more locally, creating a larger contact patch and improving traction. The suppleness of the radial casing also means the tires can be run at higher pressures, which reduces rolling resistance and decreases the chances of pinch flats, while still achieving the same or higher levels of grip.Schwalbe was the first to market with its radial tires, and it has enjoyed plenty of success and critical acclaim in the year and a half since they launched. But Schwalbes radial casing isnt even a true radial construction; it is somewhere in the neighborhood of 10-20 degrees from 90. Even then, it has proven to work very, very well, garnering many accolades from cycling media, including members of the BikeRumor team.RAD-Core adds to Vee Tire Co.s list of casing constructions.RAD-CoreDubbed RAD-Core, Vees radial design features casing threads arranged in a true radial pattern at 90 degrees, completely perpendicular to the direction of travel. According to the brand, this innovative radial construction aligns casing threads perpendicular to the ride direction, boosting grip and expanding the contact patch while reducing rolling resistance. Built with reinforced materials, it offers excellent puncture resistance and impact absorption delivering a fast, durable, and controlled ride on any terrain.So far, RAD-Core casings are only listed as an option for three of Vees more aggressive, gravity-oriented tires. These include the Attack FSX, the Attack HPL, and the Snap WCE MK2. According to the brands website, the RAD-Core casing is 72 tpi, and all three tires use the brands Full 40 Compound, with all tread knobs using the same soft rubber compound designed for maximum traction. The only other information that we currently have is that they will be coming in 27.5 x 2.5 and 29 x 2.5 sizes. Unfortunately, weights are not listed, but we wouldnt expect them to be particularly lightweight given the weight of their GXE-Core and DH-Core counterparts.The Attack HPL (left) and the Snap WCE MK2 (right) are the other tires that will be offered with RAD-Core radial casings.Vee Tire Co. RAD-Core: Pricing and AvailabilityAll three of Vees new RAD-Core radial casing tires are already listed on the brands website, but none of them are available for purchase just yet. Interestingly, all of the tires are listed at $65, but that doesnt seem correct given that weve read reports from other outlets stating projected pricing closer to $80. Weve reached out to Vee Tire representatives for additional information and will update this as soon as we know more. veetires.comThe post Vee Tire Co. Launches RAD-Core Radial Casings for Three of Its Gravity-Oriented Tires appeared first on Bikerumor.
    0 Σχόλια 0 Μοιράστηκε 385 Views
  • WWW.CYCLINGWEEKLY.COM
    Wait two minutes Tadej Pogaar shares rude fan altercation, calls for respect
    Negative fan interaction comes just weeks after Jonas Vingegaards fan-linked crash
    0 Σχόλια 0 Μοιράστηκε 436 Views
  • WWW.CYCLINGWEEKLY.COM
    New Jersey and the terrible, horrible, no good, very bad e-bike law
    New legislation in the Garden State reclassifies e-bikes as vehicles, requiring riders to obtain a license, registration and insurance
    0 Σχόλια 0 Μοιράστηκε 466 Views
  • CYCLINGUPTODATE.COM
    After Yates attacked, I found myself behind Christian Scaroni digs deep in dramatic Tour of Oman finale to seal GC win
    For a brief moment on the steepest ramps of Green Mountain, the Tour of Omanlooked like it might not go the way of Christian Scaroni. When Adam Yates launched his expected acceleration on the decisive climb, Scaroni was caught on the wrong side of the move, distanced just enough to place his overal...
    0 Σχόλια 0 Μοιράστηκε 424 Views
  • 0 Σχόλια 0 Μοιράστηκε 428 Views
  • CYCLINGUPTODATE.COM
    Tadej Pogacar spotted testing a mysterious TT model - A secret weapon for 2026 Tour?
    The list of Tadej Pogacar's palmares is already astounding at the age of just 27. The Slovenian phenomenon can win Grand Tours, hilly classics, on cobbles, doesn't fear echelons nor reduced sprints. The only discipline where he lacks something something on the best in the world is timetrialing where...
    0 Σχόλια 0 Μοιράστηκε 384 Views
  • BIKERUMOR.COM
    Wheels Manufacturing Adds Colorful Shimano Direct Mount Options to Its Growing Chainring Lineup
    Colorado-based Wheels Manufacturing makes a range of cycling components, tools, and small parts. The brand recently added to its growing product lineup with direct-mount MTB chainrings for SRAM 3-bolt cranks last year. At the time, Wheels said those chainrings were just the first in its growing chainring selection. Today, Wheels Mfg. walks the talk by adding direct-mount options for Shimano cranks. Like the SRAM versions and Wheels other products, these new chainrings are made in the U.S.A. and offered in an array of eye-catching anodized colors.Wheels Direct-Mount Shimano rings come in your choice of tooth profile, offset, size, and color.Wheels Manufacturing Direct-Mount Chainrings for ShimanoWheels Manufacturing tells us its new direct-mount Shimano chainrings are CNC-machined at its Colorado facility from premium 7075 aluminum. They look nearly identical to the SRAM 3-bolt version launched last year, with the main difference being the unique Shimano Direct-Mount interface. They are made to deliver the perfect balance of performance, durability, and precision and keep your drivetrain running smooth, quiet, and reliable on any terrain.For precision and smooth drivetrain performance, the Wheels chainrings are made in two distinct tooth profiles, optimized for use with SRAM T-Type and Eagle chains or Shimano Hyperglide+ and KMC 12-speed chains. They are offered in 28, 30, 32, and 34T sizes, and 1.5mm inboard and 1.5mm outboard offsets. Taste the rainbow.Key FeaturesShimanoDirect MountOffsets:1.5mm Inboard (52mm chainline) and 1.5mm Outboard (55mm chainline)Tooth counts:28T, 30T, 32T, 34TTooth profiles available:Hyperglide+ compatible andSRAMEagle / T-Type compatibleStandard seven anodized color options: Black, red, orange, teal, blue, purple, and green7075 aluminumengineered for excellent chain retention and smooth power transferMade in theUnited States(CNC-machined in Colorado)Wheels Manufacturing Shimano Direct-Mount Chainrings: Pricing and AvailabilityThe new Shimano Direct-Mount chainrings have a retail price of $75 and are available now direct from Wheels Mfg. through the brands website. wheelsmfg.comThe post Wheels Manufacturing Adds Colorful Shimano Direct Mount Options to Its Growing Chainring Lineup appeared first on Bikerumor.
    0 Σχόλια 0 Μοιράστηκε 422 Views
  • BIKEEASY.ORG
    All you need to know about this years Purple Way!
    Are you looking at your calendar trying to figure out how you triple-booked yourself to be at 3 places at once this weekend; while tripping over a box of wigs and costumes, and wondering if your bicycle is ready for the festivities? Yup, the curse of the Deep Gras.No matter how much we try to prepare, it always seems to sneak up on us, and suddenly its hard to keep everything straight. With that in mind, we are sending you a guide to this years Purple Way in the hopes it makes getting around a little easier through through Fat Tuesday:Be sure to review Bike Easys Mardi Gras Safe Riding TipsIf you need turn by turn directions, or want to add your recommendations; check out Bike StreetsAnd dont miss all the great things Blue Bikes is offering this year!In addition to expanding their fleet (Yay!), Blue Bikes is also expanding their service area to Jefferson Ave between Lasalle St and Tchopitoulas St, and even offering promo codes for select parades. For the codes and map, click here and scroll to the Blue Bikes section.Last but not least, this years Purple Way Guide also includes the Citys map with public toilets, first aid stations and more, as well as the RTAs Mardi Gras Guide for anyone navigating parades by transit.We hope this guide helps make your Deep Gras a little easier to get around, whether you are going to parades, or simply trying to live your day-to-day with minimal disruption.Happy Carnival!Bike Easy Team
    0 Σχόλια 0 Μοιράστηκε 550 Views
  • IRISHCYCLE.COM
    Zebra crossing markings need to be added to all uncontrolled crossing with line markings
    Comment & Analysis: My hometown of Ballina has several uncontrolled crossings with solid line markings that appear to lack a legal basis and do not appear in design guidance from the relevant national authorities. These crossings are found in other towns and minor access points and side streets in cities, but they are unusually prominent in a few locations in Ballina.It should be said that nothing in this article is legal advice, and the point of this article is to ask Mayo County Council to stop holding onto the past and do the right thing. A local media report recently covered how councillors think the crossings are dangerous. Especially the crossings along the one-way system which goes around the two main bridges in the town. The report on Independent.ie calls these crossings courtesy crossings, but there is no such concept in Irish road traffic law.If you do a Google search of the law at irishstatutebook.ie for courtesy crossing/s, it will tell you it did not match any documents.As far as I can tell, it is a concept that Mayo County Council (and maybe some others) borrowed from the UK, and it led to it being mentioned in the Design Manual for Urban Roads and Streets. It mainly was used to refer to these types of raised crossings that can be found in Westport (pictured), Ballina, Castlebar, etc., and many similar towns around the country.Heres an example of one of the raised courtesy crossings in Westport going by local media reports, they also seem to be the bane of some local councillors there:And thats where there starts to be a large problem starts with media reports and councils implying that X road user does or does not have the right of way at these locations. Without legal backing, the yielding situation at these crossings should be treated as the same as locations where there is no crossing. This adds even more danger as these crossings at different locations (at or away from junctions) seem like they might have a different level of priority for pedestrians.Legislation on yielding The Road Traffic (Traffic and Parking) Regulations 1997, as amended, include the following:(3) A driver of a vehicle approaching a road junction or a cycle track crossing shall yield the right of way to another vehicle which has commenced to turn or cross at the junction or cycle track crossing in accordance with these Regulations and to a pedestrian who has commenced to cross at the junction in accordance with these Regulations.Note that this refers to general situations, not at crossings. Theres a semi-official myth that the above means something that it does not, that it means a foot needs to be on the carragway. The phrase commenced crossing as far as I can tell is not defined in the regulations or the primary law, the Road Traffic Acts.A Judge might not have the same view as a traffic engineer. In plain English and going by basic physics, commencing crossing does not mean a foot on the carriageway; most people commence or start crossing when theyre still on a footpath. You set off to cross from the footpath, not when youre already on the carrageway. Traffic Signs ManualThe Traffic Signs Manual is not the law, but is generally based on law and is often seen as a bible for engineers I know some councils and consultants refused or at least were wary to implement Cycle Design Guidance until it was backed by the Traffic Signs Manual. So, it is very odd that engineers stick by It is of significant note that the Traffic Signs Manual section on markings does not include the type of crossing markings used at the bridges in Ballina.While the Traffic Signs Manual is not the law (there are actually some errors which are being corrected at the moment) and councils sometimes use designs that might not fully comply with it, theres good reasoning why road/street designers generally want to follow it.Design Manual for Urban Roads and Streets While it is only a statement which could be seen as wishful thinking given our current roads and streets, the Design Manual for Urban Roads and Streets states that To encourage more sustainable travel patterns and safer streets, designers must place pedestrians at the top of the user hierarchy.Councils using crossings which they think have little or no pedestrian priority clearly goes against the hierarchy.The Rules of the RoadOn yielding the Rules of the Road states: You must always yield to: pedestrians already crossing at a junction. To avoid doubt and in the interest of road safety, a vehicle should always yield to pedestrians It is important to understand that the right-of-way is not an absolute right-of-way. You must proceed with caution, having regard for other road users.On uncontrolled crossing places, the Rules of the Road state:Generally uncontrolled crossing places (courtesy crossings) are designated shared areas of road. They are coloured, slightly raised or patterned cobbled sections of road, and drivers should be aware of the potential dangers of pedestrians approaching or crossing on them. It is also important to point out that pedestrians do not have an automatic right of way when using these crossings. Pedestrians need to be alert and aware that traffic may suddenly approach from either direction.The last point that there is no automatic right of way is a weird one. Theres actually no automatic right-of-way. The funny thing about the phrasing is that even a push-button-activated fully signalled crossing isnt automatic. So, even if a road user does not have automatic right of way, the questions motorists must ask is: Should you yield your right of way? Do you have, give or take right of way? There was a good explainer from the old National Cycle Manual on understanding on who has the right of way:Road users frequently ask Who has right of way? in particular circumstances. Under Irish law, all road users have equal right of way. Rather, the question is Who is expected to yield their right of way?, as opposed to Who has right of way?Thats why old yield signs said yield right of way. The old manual added: All road users, including emergency vehicles and cyclists alike, are expected to proceed with due care and consideration for other road users in all cases, irrespective of who has right of way.Lets look at all the context togetherUnder the principle of Who is expected to yield their right of way?, the majority of people, including local motorists, have decided that it is indeed pedestrians who have a right of way at the bridges, even if the designs of the crossings are non-prescribed and not backed by law.Regular users of designs have more insight into how such a design can safely work than visitors to an area can. So, theres an expectation that motorists should yield.The problem is when visitors or the odd local are not following the norm. Then you have a child walking, and a motorist doesnt yield, and the motorist will likely be found at primary fault by the Courts. Like in this situation where the person had their foot on the carragway, but the motorist still did not yield:IMAGE: This was a UK-reg SUV.And regardless of legal liability, the council will be at fault at least morally for not providing clear crossings that are backed by law and instead using a non-standard design.The council are risking both the safety of residents (especially vulnerable groups such as children, disabled people, older people, etc.).I dont know if the councils also risk liability because of their old-school thinking on how roads work and making up designs that do not follow the law or national guidance. But they should own up to the design of their own roads and not keep pointing to a lack of funding or other issues. If a lack of funding is the issue, what funding application has been made to fix these crossings?The solutionAdd zebra markings and two signs some locations may need raised crossing to slow motorists down, but at the bridge crossings in Ballina, most motorists are going slower on those turns than they are at zerbras elesewhere in the town. I know some people will claim that more zebras will slow things down too much. The zebras are often unfairly blamed for traffic, but given that the vast bulk of motorists are already yielding at the crossing, adding zebras will not really change that. In fact, removing the current uncertainty should help remove some delays. And sometimes theres just no crossingsThe council is also likely in breach of its obligations under the Convention on the Rights of Persons with Disabilities to people with disabilities by not providing crossings in all directions at the lower bridge. The lack of crossings means people using wheelchairs are forced into the carriageway to navigate their way.Arguabelly they are also in breach of these requirements for using unclear crossings.
    0 Σχόλια 0 Μοιράστηκε 504 Views
  • CYCLINGUPTODATE.COM
    "I feel freer to do what I want": Quick-Step climber excited to switch to a stage hunter role after Evenepoel's departure
    Soudal - Quick-Step enters a new era in 2026, the era without Remco Evenepoel. While a large challenge, this is also the opportunity some of the team's climbers starved for. And among them stands out Valentin Paret-Peintre. One of the lightest riders in the peloton at mere 52 kilograms, the Frenchma...
    0 Σχόλια 0 Μοιράστηκε 417 Views